Having a mold infestation in your home can be a serious problem. In some cases, it is necessary to have a professional mold cleanup company take care of the problem. However, there are some things that you can do to clean up mold on your own.
Firstly, you should try to find a water source that is causing the mold to grow. If this is not possible, you should try to dry the area. You may use a fan or dehumidifier to do so. You will also need to get rid of the damp materials. If you can't do this, you can try to clean the mold with a cleaning agent.
Secondly, you should start by putting on a protective mask and gloves. Wearing these items will help protect you from mold spores that may be in the air. If you don't have these tools, you can purchase them from hardware stores. You can also buy safety glasses.
After you have identified the source of the moisture, you should fix the leak. You can clean the surface with a detergent solution or bleach. When you are finished, you should rinse the surface with clean water. You can also wipe the mold off with a damp cloth. If you need to, you can use a vacuum cleaner to remove the mold.
If you need to clean up a moldy appliance, you can spray a bleach solution onto the surface. This should be left on the surface for at least ten minutes. After this time, you can wipe it with a damp cloth and a detergent solution. Then, you can replace the item. If you want to use borax, you can mix it in the same ratio as bleach. You should also work the solution into the mold.
If you have a large mold infestation, you should hire a mold remediation service. You can get references and check the contractor's experience by using the guidelines provided by the ACGIH. In addition, you should ask the contractor to follow the recommendations in the EPA's guide for Mold Remediation in Schools and Commercial Buildings.
You can also prevent a mold problem by making sure that you have adequate ventilation. You should make sure that all openings are sealed. You should also make sure that you don't let any excess water into your home. If you do have a water leak, you should repair it as soon as possible. If you don't, you can expect to have a mold problem again.
If you have a small mold infestation, you can do most of the cleaning on your own. You should wear a mask and safety glasses. If you are working on a large mold infestation, you should be wearing a half face respirator. You should also wear gloves, goggles, and loose clothing.
You can also clean the walls of your home. If you see mold on the walls, you can put a piece of 6 mil polyethylene sheeting down. This will suppress the dust and prevent the spores from spreading. You should then seal the sheeting with duct tape.
